1st Phase Electrical Ltd

Electrical Contractors in North London


TEL: 07960 926870

External Garden Lighting, LED Wall Wash & Flood Lighting

We are experienced in installing external lighting schemes.  From normal flood lights to perimeter lighting, wall wash lighting (LED) ground spot lights and bollards. Here are a few examples. Lights can be triggered by timers, sensors or remote control.

Image description

On the left here we installed Collingwood 400mm  dimmable wall wash lights. These lights were controlled by 'Light Symphony'  wireless lighting system and were either triggered by dusk to dawn sensor, remote control, or by iphone or ipad.


The lights needed an LED dimmable driver that was situated just below the units in a small Wiska plastic weatherproof box.


Below, we installed Collingwood MR16 spike spot lights.  These were wired to a local 12V external transformer.  Where cables needed to be extended, we used Wiska's waterproof gel connector.  Even after the worst storms and floods in 2013/14, the lights never failed to work.

Image description

Bollards - Pathway Lighting

Image description
Image description

This installation was replacement of bollards that had been vandalised and not maintained correctly.  We removed the old bollards and installed new bollards that were controlled by a dusk to dawn sensor.

The Stainless steel bollards gave this installation a great finish.

Image description

The up/down lighters we installed at this house in Winchmore Hill, North London were to add some decorative lighting to the height of the building. Using blue LED lamps in the fittings, the reflection of light on the wall gives this property a distinctive view.


In the rear garden, we installed uplighters with a warm white lamp to give that neccessary light in the garden.

Image description